Factory Supplier Multi Layers 0.1mm Sintered Metal Filter:

Sintered Metal Filter Introduce:

Stainless steel sintered mesh filter element is referred to as stainless steel sintered filter element. The filter element is made of standard five-layer sintered mesh after superposition and vacuum sintering. Stainless steel sintering network filter material is stainless steel sintering network, sintering network is divided into protective layer, filter layer, decentralised, skeleton, skeleton layer five parts, which is both homogeneous and stable filtration precision and the filter material has higher strength and stiffness, high pressure strength and filtration precision requiring uniform is a kind of ideal filter material.

Sintered Metal Filter Property:

Sintered Metal Filter Manufacturing Technique:

The stainless steel sintered metal mesh shall be welded after being rolled round, and the roundness shall be ensured for welding. After welding, the weld shall be smoothed, so as to make the whole look beautiful and prepare for the next step of integral welding.

Then, the sintered net is welded on both ends of the cap through the stainless steel wire. During the welding process, the sintered net cannot be burned out to prevent local burn out and breakdown, thus causing the filter element to fail to perform filtration. Therefore, argon gas protection must be carried out for the welding environment during the welding process. In the above welding process, all welding tooling and special welding equipment must be installed, and the welding technology requirements for workers are also relatively strict. In case of air leakage in the bubble test within the pressure range after welding, the filter elements will all be scrapped.

Stainless steel sintering filter material of production process is complex, expensive, but the use effect is good, and can be repeatedly used, so the long term business accounting the price also is not high, in addition, if choose the product specifications, we often produce such specifications of the filter, we often do, tooling and welding equipment, skilled workers, the price would be low, also can shorten the time limit, if non standard models, you need to open new mold, and production tools and other auxiliary equipment, the cost would be higher.

Sintered Metal Filter Feature:

1. High temperature resistance, normal use below 500 ° C.

2. High filtration precision, stable pore, can effectively remove suspended solids and particles, etc., excellent filtration precision, good purification effect.

3. Good air permeability and small pressure loss. High porosity, uniform pore size, small initial resistance, easy to blow back, online regeneration, easy to clean, strong regeneration ability, long service life.

4. High mechanical strength, good rigidity, good plasticity, no additional framework support protection, simple installation and use, easy maintenance, good assembly, welding, bonding and mechanical processing.

5. Uniform porosity, especially suitable for fluid distribution, homogenization treatment and other occasions with high uniformity requirements.

6. Filtration accuracy: 1~65 m.

7. No particle shedding and no secondary pollution of the original solution.

Sintered Metal Filter Application field:

● Steam filtration

● Decarburization filtration

● Strong polar solvent filtration

● High viscosity liquid decarburization filtration

● Strong corrosive liquid, gas purification and filtration

● Petrochemical industry in addition to impurities purification filtration

● Liquid and gas purification and filtration under high temperature and pressure

Sintered Metal Filter Pictures

The Factory Pictures

The Company Honor display

Anping County Jineng metal Wire Mesh Products Co., Ltd. was established in 2008. Our company is located in Anping County of Hebei Province. Anping County is China's wire mesh production base, which in known as "home of wire mesh". We have more than 50 employees, including more than 10 professional technical personnel and senior engineers. We are production-oriented enterprises which is specialized in environmental protection, water treatment, chemical and other filtration equipment and accessories. Meanwhile we are engaged in the intensive processing of wire mesh according to the advantages of Anping as China's wire mesh production base.

Our company has a scientific management system and passed the ISO9001 quality management system certification.Every production step has strict quality test. Our company has a complete set of testing equipment: material component testing, finished product testing, experimental results testing equipment.

Our company has cooperated with many colleges and universities to attract technical talents and management talents. We invested in the research and development of new products, and we got multiple patents.

Our products meet the requirements of foreign cooperative enterprises.Our annual sales of export to European and American countries, such as France, Spain, Germany, America, Canada, Australia, Japan and other countries, are growing at a rate of 35%. We look forward to the cooperation with enterprises from all over the world.