Custom Stainless Steel Sintered Filter Element 5 Microns 10 Microns
100 Microns:
Sintered Metal Filter Production Introduce:
The stainless steel sintered mesh filter element is referred to as
the stainless steel sintered filter element. The filter element is
made of the standard five-layer sintered mesh by superposition and
vacuum sintering.Stainless steel sintering network filter material
is stainless steel sintering network, sintering network is divided
into protective layer, filter layer, decentralised, skeleton,
skeleton layer five parts, which is both homogeneous and stable
filtration precision and the filter material has higher strength
and stiffness, high pressure strength and filtration precision
requiring uniform is a kind of ideal filter material.
Sintered Metal Filter Feature:
The most important difference between stainless steel sintered mesh
filter and other filter elements is the use of a large number of
high-precision welding process.The stainless steel mesh sintered
filter element is made of sintered mesh after cutting and
high-precision welding.The most important point of sintering filter
cartridge is the use of a large number of high-precision welding
process. Sintering filter cartridge is welded after rolling round
treatment. The welding place should ensure roundness and correct
the weld after welding, so that the whole looks more beautiful.
Sintered Metal Filter Manufacturing Technique:
Stainless steel sintering network filter the selection of raw
materials, the precision of control, and welding processing is the
filter in the late three important factors, the products on the
market the sham as the genuine, inferior materials, with low charge
and high filtration precision, rough processing technology, makes
some products quotation is extremely low, customers need to polish
eyes, in order to avoid a pyrrhic victory, production accident
loss.
The most important difference between stainless steel sintered
filter element and other filter element is the use of a large
number of high-precision welding process. Stainless steel sintered
metal mesh after rolling round treatment for seam welding, welding
need to ensure roundness, repair weld after welding, so that the
overall look beautiful, but also for the next step of the overall
welding preparation.
Then the sintering net through stainless steel welding wire welding
on both ends of the end cover, welding process can not burn
sintering net, in order to prevent local burn breakdown, resulting
in filter element can not play a filtering role, so welding process
must be welding environment argon protection. All the above welding
process must have welding tooling and special welding equipment,
and the welding technical requirements for workers are also
relatively strict. In case of air leakage in the pressure range of
the bubble test after welding, the filter element will be scrapped.Stainless steel sintering filter material of production process is
complex, expensive, but the use effect is good, and can be
repeatedly used, so the long term business accounting the price
also is not high, in addition, if choose the product
specifications, we often produce such specifications of the filter,
we often do, tooling and welding equipment, skilled workers, the
price would be low, also can shorten the time limit, if non
standard models, you need to open new mold, and production tools
and other auxiliary equipment, the cost would be higher.
Shipping:
Packaging:
